Emissions

This tutorial is under development. If you wish to volunteer in developing this, please mail to contact@codecalculation.com

Emission Measurement Conversions & Corrections

Convert emissions from ppm units to mg/m3 units, from wet basis to dry basis and perform corrections to reference Oxygen levels from measured Oxygen levels.

Combustion and SOx emissions

Perform combustion calculations with full flexibility. Fuel can be specified in mole percent or in mass percent. Flue gas composition can be obtained, in ‘mole per mole of fuel’ or in ‘kg per kg of fuel’. The calculations also calculate the SOx emissions in the required units, while correcting for moisture and oxygen levels. The program also provides the flexibility to set the standard conditions for reporting of emission levels if ‘mg/Sm3’ are chosen as the emission units.